Sodium Polyacrylate(PAAS)

2014-01-04 09:45:48

Sodium Polyacrylate(PAAS)






PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc.



items index
Appearance Colorless or light yellow transparent liquid yellow transparent viscous liquid
Solid content % 30.0 38.0-42.0
Free monomer (CH2=CH-COOH) % 0.5 1.0
Density (20℃)g/cm3 1.150 1.250
pH(1% solution) 7.0max 7-9(10% solution)

Note: 40%,50% Polyacrylic Acid sodium (PAAs) can be supplied on demands

3,Application range&Using method:

    PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment.

4,Package and Storage:

25kgor 250kg in plastic barrel. Storage for ten months in room shady and dry place.

5,Safety Protection:

Acidity, Avoid contact with eye and skin, once contacted, flush with water.



Tel: +86-632-3536598

Fax: +86-632-3536766


Corrosion inhibitor Scale inhibitor Polymer Dispersant Dirt dispersion agent Antisludging agent water treatment chemicals Water treatment

Copyright(C)2013. Zaozhuang Dongtao Chemical Technology Co.,Ltd. All Rights Reserved. Supported by Zaozhuang Dongtao Chemical Technology Co.,Ltd.